Fault Description | System Behaviour |
---|---|
T1 | Ignition test – checking the igniter spark |
T2 | Fan test – checking the basic fan |
T3 | Pump test – checking the basic pump |
T4 | Three way valve test |
T6 | Ionisation oscillator test |
9A 362 | error – incorrect HCM fitted |
9U 233 | Heat Control Module (HCM) error – problem with code plug |
B7 257 | Internal error – possible control board problem |
C6 215 | Fan problem – fan running too fast |
C7 214 | Fan problem – fan not running |
D1 240 | Return sensor error – sensor may be wet or damaged |
E2 222 | Flow sensor short circuit error |
E5 218 | Flow temperature too high |
E9 219 | Safety sensor fault – temperature too high, sensor short circuit or open circuit |
EA 227 | No flame detected or flame signal loss during operation |
F0 237 | Internal error |
F7 228 | Flame error – false flame or flame detected before burner started |
FA 306 | False flame fault – flame detected after burner stop |
FD 231 | Mains power fault – electrical power interruption |
FA 364 | Gas valve EV2 leak test failed – gas valve leak |
FB 365 | Gas valve EV1 leak test failed |
A1 281 | Pump stuck or running with air in the system |
C1 264 | Airflow stopped during operation |
C4 273 | Airflow present during last 24 hour |
D1 240 | Return sensor short circuit |
D4 271 | Temperature difference between flow and safety sensor exceeds limit |
E9 224 | Max thermostat activated – flue gas thermostat overheat |
EA 227 | No ionisation detected after ignition |
EF 349 | Central heating boil detected – boiler operating at minimum burner load with temperature difference greater than 18°C between Flow & Return. |
NO CODE 212 | Safety or flow temperature rising too fast |